Pottery...

Moderator: Littlabit

User avatar
Glauri
Whee!
Posts: 2111
Joined: Fri May 29, 2009 7:15 am
Location: TEXAS!

Pottery...

Postby Glauri » Fri Jun 07, 2013 4:15 pm

So, what a great route from 250 on up? I don't mind buying components (if I have to), but I hate stuff with a zillion steps, or anything involving enchanting (since I have no access to an 'chanter).
Do not regret growing older. It is a privilege denied to many.
Glauri

Rashod
Whee!
Posts: 397
Joined: Tue Jan 10, 2012 6:10 pm

Re: Pottery...

Postby Rashod » Fri Jun 07, 2013 9:05 pm

I used the large axe head mold route to 282?ish. It is:

To 274 -> 4 large block of clay, large axe head shaped mold sketch, and immaculate silk

To 280 something -> Same recipe, but substitute fantastic silk

It think I spent 100-200pp on each silk in the bazaar.

Then the rest of the way up star ruby encrusted stein, which I had to bum some enchants for. I am sure someone will be more than willing to do the enchants for you.
Image

User avatar
Sorick
Whee!
Posts: 108
Joined: Fri Nov 26, 2010 4:10 pm
Location: Chicago, IL

Re: Pottery...

Postby Sorick » Fri Jun 07, 2013 9:22 pm

http://mboards.eqtraders.com/eq/showthr ... v-Apr-2009

Has links to the combines. Enchanter only needs to be lvl 39 as well, so quite easy to make an alt real fast if it comes to that.

Goofydoofy
Ride a cowboy, save a horse
Posts: 4671
Joined: Fri Jun 10, 2005 7:33 pm
Location: Bullhead City, AZ, USA
Contact:

Re: Pottery...

Postby Goofydoofy » Sat Jun 08, 2013 4:23 am

Level 105 Druid, Level 105 Enchanter, Level 105 Paladin
Drinal - Maelin Starpyre Server

User avatar
Tarvas
Whee!
Posts: 2007
Joined: Sat Sep 05, 2009 9:48 am
Location: Dead in a ditch

Re: Pottery...

Postby Tarvas » Sat Jun 08, 2013 5:05 pm

Screw all that crap. Make weapons ornaments. All you need is expansion dust. Zam should have the recipes on each dust.
Alan
I'm a Tank!
Image
Punked, Carvas, Harvas, Cayleb

User avatar
Sharrien
Whee!
Posts: 1150
Joined: Tue Jun 03, 2008 2:06 pm

Re: Pottery...

Postby Sharrien » Tue Jun 11, 2013 5:35 am

Agree with Tarvas, the easiest pottery combines with the least number of subcombines is weapons ornaments. Doesn't cost much plat either except for the dropped component. Some sell for a bit of profit in the baz but they slowly.

Star Ruby Encrusted Stein is a 100% vender route to 300 in pottery. Tons of subcombines tho and you need a baby chanter for the clay. However, in compensation for all the extra clicking the end result tributes for more than the plat that you put into it. That part was a huge pain in the ass back when we could only tribute in our home towns but with a tribute master and kiln conveniently located in our guildhall and massive bag space it's much easier these days.

Or if you want to make a bit of profit you can do powersources. Downside is you need a higher level chanter for vials of purified mana and the run for components in Barren Coast is an annoyance. Also, the margin is pretty low and the components cost a lot so it doesn't take many failures to start losing money. Upside is that both the throwing and the firing steps triv over 300 and on the way to buy components you can swing by the kerra village in Tox Forest and slaughter a boatload of kitties for slayer achievements.
Savage Spirit Sharrien Dreamstalker, Master Artisan, Master Researcher
Primal Elementalist Ravingronn Blazewarden, Master Artisan, Master Researcher

User avatar
Meso
Whee!
Posts: 1093
Joined: Mon Feb 16, 2009 1:02 pm

Re: Pottery...

Postby Meso » Tue Jun 11, 2013 4:06 pm

i could not find the weapons ornament recipes when i did it, so I went with the steins.

User avatar
Tarvas
Whee!
Posts: 2007
Joined: Sat Sep 05, 2009 9:48 am
Location: Dead in a ditch

Re: Pottery...

Postby Tarvas » Wed Jun 12, 2013 10:05 am

Here a few.

Unfired Aegis of Blackscales Ornament -328 using essences of Alaris.
Unfired Aligned Long Spear Ornament - 328 using planar energy.
Unfired Obsidian Scale Katana Ornament - 308 using dream dust.

Just do your search for ornamentation and select pottery in Zam and it will bring them all up. You just need to find the ones that only require one dust.
Last edited by Tarvas on Wed Jun 12, 2013 7:37 pm, edited 2 times in total.
Alan
I'm a Tank!
Image
Punked, Carvas, Harvas, Cayleb

Goofydoofy
Ride a cowboy, save a horse
Posts: 4671
Joined: Fri Jun 10, 2005 7:33 pm
Location: Bullhead City, AZ, USA
Contact:

Re: Pottery...

Postby Goofydoofy » Wed Jun 12, 2013 1:32 pm

Angel dust?
Level 105 Druid, Level 105 Enchanter, Level 105 Paladin
Drinal - Maelin Starpyre Server

warador
Whee!
Posts: 608
Joined: Fri Nov 07, 2008 9:05 am
Location: central ohio

Re: Pottery...

Postby warador » Thu Jun 13, 2013 12:15 am

i made a f2p chanter to enchant stuff for my brewing tradeskill .hes lvl 24 right now if you need something enchanted i can see if he is high enough
Image

User avatar
Meso
Whee!
Posts: 1093
Joined: Mon Feb 16, 2009 1:02 pm

Re: Pottery...

Postby Meso » Thu Jun 13, 2013 8:45 am

still requires magic clay.

User avatar
Glauri
Whee!
Posts: 2111
Joined: Fri May 29, 2009 7:15 am
Location: TEXAS!

Re: Pottery...

Postby Glauri » Fri Jun 14, 2013 4:56 am

Thanks much for all of the ideas, and for the help with mats! I'm slowly getting there...275 and counting!
Do not regret growing older. It is a privilege denied to many.
Glauri

User avatar
Glauri
Whee!
Posts: 2111
Joined: Fri May 29, 2009 7:15 am
Location: TEXAS!

Re: Pottery...

Postby Glauri » Sun Jun 16, 2013 4:13 pm

Thanks to help and advice from guild friends, I got to 290.

Finally!! Now 300 in all my TS skills. Thank you so very much!
Do not regret growing older. It is a privilege denied to many.
Glauri